ME.10:5.2 - Two-Task Trade-off with Two Retained Candidates
Extend the constructed case with a second mandatory action. CalibrationEngineer-5 must retrieve the current description for planned family-B calibration Work. Computational user System AuditService-2 must use the exact v4 edition in ReleaseAudit-7 under a stable digest and audit currentness record. These are different receiver/action pairs, so they require different use-bounded claim groups even when one maintained source could realize both. No AuditService-2 task Work has yet occurred.
The Method-specific problem is now cross-use allocation of complementary governed representation results. The ME.9 profile branch applies. Each row below embeds the applicable complete C.37 group and preserves admitted Method M-Calibrate-Sensor-B and current ME.8 result MD-Calibrate-Sensor-B-v4 as its source. The rows select for their own actions; they do not yet constitute the ME.9 cross-use result or select a support configuration.
| ME.9 row and exact action | Direct result, exact claim, and reliance | Exposure and loss | Receiving result, disposition, and return |
|---|---|---|---|
MRP-Cal-B-Retrieve-1: CalibrationEngineer-5 retrieves material for planned family-B calibration Work. Qualification window: the currentness cue is checked at retrieval and remains usable only for that v4 family-B use through the planned Work. | REP-Cal-B-Retrieval-1 is the directly governed C.2.1 index episteme. Exact claim: v4 is current for family B and carries the unknown-serial stop and publication link. A.2.4 classifies the intended status-evidence use. A.10 path P-Cal-B-Retrieve-v4 carries that currentness/applicability premise with RelianceDisposition=pass inside the stated window. | Exposes current edition, family-B applicability, stop, and link; omits the stable audit digest and audit currentness record, which this action does not require. | task-pass from W-ME10-Retrieve-Cal-B-1; select for this retrieval action. Return to ME.8 for changed source claims, C.2.1 or A.10 for a failed direct result, or this row when the use, window, disposition, or observation changes. Stop if the edition or cue changes, applicability no longer covers family B, or the serial class is unknown. |
MRP-Cal-B-Audit-1: AuditService-2 uses the exact edition in ReleaseAudit-7. Qualification window: at audit start the currentness record must identify v4 and the stable digest must identify the exact v4 bytes used by that audit run. | REP-Cal-B-Audit-1 is a governed C.2.1 audit-register episteme tied to a separately identified E.24.PUB publication result. Exact claim: the named digest and record bind the audit use to the current v4 edition. A.2.4 classifies the intended audit-evidence use. A.10 path P-Cal-B-Audit-v4 returns RelianceDisposition=abstain until the digest/currentness pair is checked inside the audit window; missing, stale, out-of-window, or mismatched values stop before reliance. | Exposes edition identity, stable digest, and audit currentness record; omits the human applicability explanation and unknown-serial stop, which this action does not consume. Publication does not supply reliance or the task result. | missing-task-test[AuditService-2]; no audit task Work exists and no task-pass is claimed. The row is unresolved, not failed. Return to ME.8 for changed source claims, C.2.1, E.24.PUB, or A.10 for a failed direct result, or this row when its use, window, stop, task observation, or disposition changes. |
ME.9 now returns cross-use profile result MRP-Cal-B-Retrieve-Audit-1 rather than treating row colocation as composition:
| Profile position | Cross-use result |
|---|---|
| shared Method source | Both rows return to admitted Method M-Calibrate-Sensor-B and current MethodDescription MD-Calibrate-Sensor-B-v4. |
| cross-use correspondence | The retrieval currentness cue and the audit digest/currentness pair must designate the same exact v4 edition. Matching the label v4 is insufficient; a changed edition reopens both rows and this correspondence. |
| conflicting omissions | Retrieval needs family-B applicability and the unknown-serial stop but omits the stable digest. Audit needs the digest and audit-currentness record but omits the human applicability explanation and serial-class branch. Combining the presentations does not erase either omission or prove consistency. |
| edition relations | The retrieval row is qualified for the planned family-B Work window; the audit row is qualified only for the named ReleaseAudit-7 run after its digest/currentness check. A serial-class change can reopen retrieval alone; a digest mismatch can reopen audit alone. |
| keep-separate decision | REP-Cal-B-Retrieval-1, REP-Cal-B-Audit-1, their C.37 dispositions, and their receiving task results remain separate. The profile creates no super-representation, common task pass, publication, or support arrangement. |
| profile return | Retain retrieval as select and audit as unresolved; return missing-task-test[AuditService-2] and the unchecked digest/currentness relation. Reopen both rows only when their shared source identity or correspondence changes. |
The configurations below compare how those two governed results and the explicit cross-use relation could be supplied and maintained. C.37 does not choose among them, and the ME.9 profile does not rank them; ME.10 retains that configuration decision.
| Candidate configuration | Engineer retrieval row | Audit-service row | Cross-task burden and disposition |
|---|---|---|---|
| Manual index row only | Observed pass in W-ME10-Retrieve-Cal-B-1. | Insufficient: the editable row supplies no stable publication digest or audit currentness record. | Exclude for the two-task mandatory set. |
| One signed read-only register supplies separate retrieval and audit presentations | Untested for the engineer; its declared retrieval presentation can expose applicability and the stop. | Untested for AuditService-2; its declared audit presentation can expose the digest and currentness record. | One maintained source for two governed results, but the case lacks approval-latency evidence. Retain. |
| Manual retrieval index plus a signed audit log | The existing retrieval pass remains relevant to the index route. | Untested for AuditService-2; its declared design can expose the audit record. | Lower expected retrieval delay but duplicated currentness maintenance and an untested consistency relation. Retain. |
The last two candidates cover the declared features differently, but the case supplies neither audit-task evidence nor a priority between approval latency and duplicated currentness maintenance. The audit profile row therefore remains unresolved, the cross-use profile returns its unchecked correspondence and missing-task-test[AuditService-2], and reliance stops; retain both candidates with unresolved-configuration-choice[approval-latency-vs-duplicate-currentness-maintenance]. If a receiving decision authorizes a split, name the user/task boundary, currentness owners, and consistency relation; do not call the union globally minimal.